Siding joints are a break in an otherwise continuous surface. When the siding types are different thicknesses, outside and inside corners are created that require extra attention. When one of the materials is brick, this detail gets even trickier.

Recycled and recyclable, metal lap siding is durable and affordable. But since its installation must accommodate significant expansion and contraction, it is very dependent on both weather-resistive barrier and flashing details.

In general, exterior above-grade walls should have continuous air, water, and thermal barriers.

Installing rigid insulation as the exterior sheathing can accomplish all of these tasks, but you need to account for shear resistance (provide wall bracing) in other ways, and you must provide special details if you expect the foam sheathing to perform as a water-resistive barrier (WRB).

A double-stud wall insulated with dense-packed cellulose is an excellent thermal barrier; however, double-stud walls still need at least one additional air barrier to limit air leakage through the cellulose.

Check out the advanced framing section of Construction Detail Library for alternative techniques to achieve shear resistance, and check out Using Rigid Foam As a Water-Resistive Barrier for more information on walls without housewrap.

For more information on air barriers, see Questions and Answers About Air Barriers

Enclosure Overview

Siding Choices

Brick Veneer