Energy Efficiency and Durability- Page 9 of 686
-
A question about SHGC
I understand SHGC is about blocking penetration of sunlight into an interior, and thereby reducing solar heat gain (SHG). But if a window is shaded, so that direct light is…
-
1979 Uninsulated Slab Home in Vermont
Hi there,We are purchasing a home by Mount Mansfield in Vermont at 1400 feet (thus cold in winter :) and it was built in 1979. I presume there was no…
-
Metal Sheathing pole barn workshop
I am a builder in Columbus Ohio. On my own property I have an amish built Pole Barn workshop and office.I want to finish the interior, insulate, and heat/cool with…
-
Moisture control & insulation in New England tiny house
Hi there! First time posting here.I am converting a 10′ x 10′ shed into a tiny house in New Haven, CT and trying to figure out how to adequately control…
-
Double Air Barrier
Designing my own passive house inspired home in 4A. The kitchen and living area will have scissor trusses. I recently found and attached a roof assembly that uses a double…
-
what if a chimney is not used, but cannot be removed?
Hello! I am a (volunteer) trustee of a condo association. Our building is a historic school, originally built 1898. It was converted to condos in 1987. Climate zone 5A (Massachusetts).Our…
-
Shallow Vented Crawlspace Insulation/Encapsulation
Hello all, I'm Daniel. Here is my dilemma, I am trying to figure out a way to insulate and/or encapsulate a very shallow vented crawlspace under an older home. I'm…
-
Two R15 Batts in a 7.25” Space vs Compressing an 8.25” inch R30 Cathedral Batt?
What are your thoughts about using two R15 batts totaling 7 inches depth and R30 in a 7.25 inch cavity vs an R30Cathedral batt which is 8.25 inches that gets…