GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Questions- Page 2426 of 3125

  • Question & Answers

    Is there any low- or no-VOC, mold-resistant sheetrock and wall plaster on the market (for basement reconstruction)?

    It is my understanding that sheetrock and wall plaster are typically high-VOC items, especially mold-resistant sheetrock. Also, are carpet tiles a good low- or no-VOC flooring option?

  • Question & Answers

    Underlayment for an Unvented Roof

    My questions are related to part of the reply Mr. Holladay made to the "Proper Underlayment for Unvented Asphalt Roof" question posted on 11-14-14.

  • Question & Answers

    Am I crazy or is the NIST house really confusing?

    I was all excited to dig into the details of the NIST NZERTF. I was slowly moving away from SIPS and looking a lot at the PERSIST building method. I…

  • Question & Answers

    ERV – where does the moisture go?

    I understand the difference betwen an HRV and an ERV - that the HRV transfers heat between the incoming and outgoing air while an ERV transfers both heat and moisture.…

  • Question & Answers

    My wife needs convincing …

    You all have me convinced that I can change out my Mitsu AC minisplits with some all season heating and AC cold climate heat pumps and save substantially on the…

  • Question & Answers

    Spray foam insulation

    I have a 100 year old house in Zone 5. There is a sunroom (approx. 5'X20') on the south side of the house which is all windows. It is built…

  • Question & Answers

    Moisture in exterior wall

    I have posted questions several times regarding my double wall assembly on a house that I am in the process of building in a very cold climate. At the present…

  • Question & Answers

    Crawl space encapsulation

    Hey Folks - I know the topics has been covered but I am still scratching my head and need some clarification and I will but this project to rest. Crawlspace…

  • Question & Answers

    When installing fiberglass batts which is the correct method?

    I've always folded the paper flanges over each other on the stud & stapled. I've seen some videos on You tube from major companies showing them stapling the flanges on…

  • Question & Answers

    Brands of HRV?

    Anyone have any experience with either Lifebreath or Imperial HRVs? My architect specified Zehnder, but my HVAC guy has installed Lifebreath and Imperial, but not Zehnder.