GBA Logo horizontal Facebook LinkedIn Email Pinterest Twitter X Instagram YouTube Icon Navigation Search Icon Main Search Icon Video Play Icon Plus Icon Minus Icon Picture icon Hamburger Icon Close Icon Sorted

Questions- Page 2415 of 3124

  • Question & Answers

    Vapour-permeable peel-and-stick

    I'm getting close to the point where I need to turn the plywood sheathing of a double stud wall (which will be insulated with dense packed cellulose) into a proper…

  • Question & Answers

    Cathedral ceiling fans and energy efficiency

    Hi all, I just moved in to a house with cathedral ceilings and a wood burning stove (insert) and trying to figure out how important a ceiling fan is. People…

  • Question & Answers

    ERV or regular bath fan?

    I am currently doing a 420sqft extension on the back of my house that includes a bathroom. All of the outside walls have been sealed on the inside with spray…

  • Question & Answers

    New Home Build

    Greetings, I'm a long time reader. I've learned a great deal from reading these forums. We're building a new home real soon. Hopefully, we will be in this home a…

  • Question & Answers

    Plywood in the framing exposed to the elements for ~5-6 weeks?

    Hello, Our new construction is in Pittsburgh, PA, mixed humid climate, quite rainy. We also usually have sleet and some snow in winters. The framing is to start 12/8/14. Windows…

  • Question & Answers

    Flash-and-fill hybrid plus external insulation?

    I designed a 2x6 dense-packed cellulose wall, fully sheathed in plywood, plus 3" of external Roxul Cavity Board. Climate Zone 6. I'm trying to consider alternative wall types due to…

  • Question & Answers

    Noise from PEX/PVC drain pipes

    Hello, We are at the stage of starting the framing for the new construction home in Pittsburgh. It is also a Passive House duplex. Our architect specified cast iron for…

  • Question & Answers

    Span tables for dead loads above 20 PSF.

    Does anyone know where I can find span tables or equations to calculate dead loads in excess of 20 PSF? Every table I've found including IRC, AF & PA show…

  • Question & Answers

    I can’t find out how amps are converted to volts

    As I said in an earlier thread I am making a solar powered usb charger. My solar panels have more than enough amps for the charge but the volts are…

  • Question & Answers

    Proper installation of 2 adjacent outdoor mini-split units?

    We just finished a major renovation project that included sprayfoaming, all new windows, and one new Fujitsu Halcyon mini-split on each of the three levels. The temps are now dropping…