Questions- Page 2395 of 3124
-
Recommendations for concrete sealer?
Our contractor is recommending Clementone Clear Sealer for our new basement slab, which will be frequently used living space. The MSDS lists ethoxylated acetylenic diols, and the regulatory info says…
-
Guest Bloggers
Well hi there, I was wondering to whom I should be in touch with to discuss guest blog opportunities. Please let me know! Best, Jessie
-
Can an applied veneered cut stone on the exterior of a house in Houston, TX hang over the property line?
Any help appreciated, be it by links, PDFs, response. Thank you
-
Taping seams of tongue and groove sheathing
Hello, I am remodeling a powder room in a 1928 brick colonial. While the wall is open I would like to air seal and insulate the cavities from inside the…
-
Using too much electricity?
I just completed a 1043 sq ft story and a half cottage with a 351 sq ft garage apartment over a detached single car garage. I have two mitsubishi hyper…
-
Humidity question
I live in southern Ontario (think Buffalo) and moved here last year. The house had a 80% efficient furnace that used indoor air for combustion, the house had 17.68 ACH50,…
-
What are your thoughts here?
This does not really matter ultimately but its an interesting thought exercise.
-
WRB recommendations for interior fireplace surround
I am redoing a fireplace surround with synthetic stone and need to know what to use for a WRB under lath mesh and scratch coat
-
Would you be concerned about interior Formaldehyde levels with mineral wool
I was looking at using mineral wool batt insulation between studs in a staged retrofit situation. It looks like most of the mineral wool batts available still use a formaldehyde…
-
Finishing insulation on unvented sloped roof with mineral wool over polystyrene
I have an unvented, sloped roof. I cut and cobbled 5 inches of expanded polystyrene into roof rafters, and 3 inches into attic wall studs. Then placed 2-6 inches of…